Eotech Target Pointer Illuminator Aiming Light Manuel d'utilisateur télécharger pdf (Page 80)

2-56

2.6.2 IR Illuminator. IR Illuminator modes of operation are

selected and activated as described in paragraphs 2.5.1 and

2.5.2 respectively.

2.6.2.1 The IR illumination beam may be varied from flood

to spot by rotating the Illuminator Focus Knob as shown in

Figure 2-36. Direction of rotation, and corresponding beam

size, is marked on the AN/PEQ-2A housing.

Figure 2-36 IR Illuminator Focus Knob

2.6.2.2 When installed over the IR Illuminator, the Diffuser

Lens Cap spreads the laser energy over an angle of

approximately 45 degrees, allowing for illumination of a

wider area. It is most effective when used in conjunction

with the IR Illumination Focus Knob adjusted to the widest

beam (flood) setting. To use the IR Illuminator Diffuser Lens

Cap, stretch it out and over the front of the IR Illuminator so

that it is snug and firmly in place. See Figures 2-34 and 2-

35.

FLOOD

SPOT

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 97 98

Pas de commentaire

Eotech Target Pointer Illuminator Aiming Light Manuel d'utilisateur Page 80